Sonicake Wireless Audio System
This is a 2.4G wireless audio system suitable for high impedance instruments such as electric guitars and bass. Reduce the constraints of wired connections, allowing you to move freely while playing. Low latency (<5ms), high fidelity (flat frequency response curve), to meet your small stage performance needs.
ā 2.4G wireless audio system suitable for high impedance instruments such as electric guitars and bass, with low latency (<5ms), high fidelity (flat frequency response curve), transmission distance: ā„ 30m.
ā Press and hold the pairing button on both the transmitter and receiver for more than 2 seconds. If the blue lights on both the transmitter and receiver turn on, it indicates a successful pairing. The transmitter will select the best channel when turned on, and the receiver will automatically follow the transmitter.
ā The plug rotates more than 220 degrees, and the rotating joint uses metal damping components. It can maintain good damping sensation even after rotating more than 5000 times.
ā Number of channels: 6, and 6 sets of this device can be used simultaneously in the same scene. Supports one transmitter with up to six receivers simultaneously.
ā USB dual Type C head, supports simultaneous charging. If there is no volume output for more than 15 minutes, it will automatically shut down.
Specificationsļ¼
Sampling rate: 48kHz/24bit.
Delay: ⤠5ms.
Transmission distance: ā„ 30m.
Frequency response: 20Hz-20kHz,+1.0/-1.0 dB.
THD+N:<0.05% @ 1kHz.
Signal to noise ratio: ā„ 80dB.
Frequency band: 2.4GHz ISM.
Interference handling method: manual frequency hopping.
Battery: Equipped with a built-in lithium battery, it can last for ā„ 5 hours on a single charge.
Number of channels: 6.
Can be used within the same area: Ā 6 sets.
One to many: Only supports one transmitter, with a maximum of six receivers.
Not supporting multiple transmitters, equipped with one receiver, and other connection methods.
SPECIFICATIONSļ¼
Battery: Rechargeable lithium battery 3.7V/mAh.
Frequency response: 20Hz-20kHz.
Volume: 70(W)x30(D)x13mm(H), Folded height: 25.3mm.
Weight: 33g.
Attached accessories:Owner's manual,USB cable.Ā
Product Information
Product Information
Shipping & Returns
Shipping & Returns

Sonicake Wireless Audio System
Sonicake Wireless Audio System
This is a 2.4G wireless audio system suitable for high impedance instruments such as electric guitars and bass. Reduce the constraints of wired connections, allowing you to move freely while playing. Low latency (<5ms), high fidelity (flat frequency response curve), to meet your small stage performance needs.
ā 2.4G wireless audio system suitable for high impedance instruments such as electric guitars and bass, with low latency (<5ms), high fidelity (flat frequency response curve), transmission distance: ā„ 30m.
ā Press and hold the pairing button on both the transmitter and receiver for more than 2 seconds. If the blue lights on both the transmitter and receiver turn on, it indicates a successful pairing. The transmitter will select the best channel when turned on, and the receiver will automatically follow the transmitter.
ā The plug rotates more than 220 degrees, and the rotating joint uses metal damping components. It can maintain good damping sensation even after rotating more than 5000 times.
ā Number of channels: 6, and 6 sets of this device can be used simultaneously in the same scene. Supports one transmitter with up to six receivers simultaneously.
ā USB dual Type C head, supports simultaneous charging. If there is no volume output for more than 15 minutes, it will automatically shut down.
Specificationsļ¼
Sampling rate: 48kHz/24bit.
Delay: ⤠5ms.
Transmission distance: ā„ 30m.
Frequency response: 20Hz-20kHz,+1.0/-1.0 dB.
THD+N:<0.05% @ 1kHz.
Signal to noise ratio: ā„ 80dB.
Frequency band: 2.4GHz ISM.
Interference handling method: manual frequency hopping.
Battery: Equipped with a built-in lithium battery, it can last for ā„ 5 hours on a single charge.
Number of channels: 6.
Can be used within the same area: Ā 6 sets.
One to many: Only supports one transmitter, with a maximum of six receivers.
Not supporting multiple transmitters, equipped with one receiver, and other connection methods.
SPECIFICATIONSļ¼
Battery: Rechargeable lithium battery 3.7V/mAh.
Frequency response: 20Hz-20kHz.
Volume: 70(W)x30(D)x13mm(H), Folded height: 25.3mm.
Weight: 33g.
Attached accessories:Owner's manual,USB cable.Ā
Original: $660,000.00
-70%$660,000.00
$198,000.00Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
This is a 2.4G wireless audio system suitable for high impedance instruments such as electric guitars and bass. Reduce the constraints of wired connections, allowing you to move freely while playing. Low latency (<5ms), high fidelity (flat frequency response curve), to meet your small stage performance needs.
ā 2.4G wireless audio system suitable for high impedance instruments such as electric guitars and bass, with low latency (<5ms), high fidelity (flat frequency response curve), transmission distance: ā„ 30m.
ā Press and hold the pairing button on both the transmitter and receiver for more than 2 seconds. If the blue lights on both the transmitter and receiver turn on, it indicates a successful pairing. The transmitter will select the best channel when turned on, and the receiver will automatically follow the transmitter.
ā The plug rotates more than 220 degrees, and the rotating joint uses metal damping components. It can maintain good damping sensation even after rotating more than 5000 times.
ā Number of channels: 6, and 6 sets of this device can be used simultaneously in the same scene. Supports one transmitter with up to six receivers simultaneously.
ā USB dual Type C head, supports simultaneous charging. If there is no volume output for more than 15 minutes, it will automatically shut down.
Specificationsļ¼
Sampling rate: 48kHz/24bit.
Delay: ⤠5ms.
Transmission distance: ā„ 30m.
Frequency response: 20Hz-20kHz,+1.0/-1.0 dB.
THD+N:<0.05% @ 1kHz.
Signal to noise ratio: ā„ 80dB.
Frequency band: 2.4GHz ISM.
Interference handling method: manual frequency hopping.
Battery: Equipped with a built-in lithium battery, it can last for ā„ 5 hours on a single charge.
Number of channels: 6.
Can be used within the same area: Ā 6 sets.
One to many: Only supports one transmitter, with a maximum of six receivers.
Not supporting multiple transmitters, equipped with one receiver, and other connection methods.
SPECIFICATIONSļ¼
Battery: Rechargeable lithium battery 3.7V/mAh.
Frequency response: 20Hz-20kHz.
Volume: 70(W)x30(D)x13mm(H), Folded height: 25.3mm.
Weight: 33g.
Attached accessories:Owner's manual,USB cable.Ā
























